If the MOMIFTP utility cannot be used to transfer files from the PC to the NonStop server, these instructions describe how an alternate file transfer program would be used. The MOMIFTP utility does not perform any 'special' actions, but simply renames files (if existing are present) and transfers MOMI files from the PC to the NonStop System using FTP or SFTP.
The first step is to locate the source files -
If MOMI is installed on the PC the files are located by default at :
C:\Program Files (x86)\BlackWood Systems\MOMI_n.nn\Tandem Install\NonStop\
(where n.nn is the release package number)
If you have the MOMI download ZIP from our website expand the files to an empty subdirectory and look for the subdirectory \NonStop Install. The MOMI DVD files are located in the same subdirectory name.
Note that under the subdirectory \NonStop there are two additional directories \Ascii and \Binary. This grouping indicates the file transfer mode (i.e. ASCII or Binary).
The second step, using a file transfer utility, copy files from the PC to the NonStop (all to the same destination subvolume) -
Binary
BWMOMI
BWMOMIi
BWMOMIx
EMSEXPO
ASCII
FUPEVTCX
OBYMOMI
CONFMOMI
OBYCSQL
OBYALTER
The third step is to logon to the NonStop System, volume to the location where the files were placed and OBEY the TACL obey file OBYALTER to alter the file codes (or manually perform the steps below):
a) FUP alter BWMOMI ,code 700
b) FUP alter BWMOMIi ,code 800
c) FUP alter BWMOMIx ,code 500
d) FUP alter EMSEXPO ,code 845
At this point the files are transferred. Continue the instructions in the section First Installation Update an existing installation after the step using MOMIFTP.